international yacht varnish drying time

How Long Does Yacht Varnish Take To Dry?

Yacht varnish was created to be used on yachts, you don’t say! but has since become so popular it is used in a multitude of circumstances.

Yacht varnish is a clear, marine-grade varnish. It is ideal for use on yacht woodwork, doors, gates, fascias, sheds, furniture etc. Can be used over existing paintwork to increase gloss finish and weather resistance.

But how long does it take to dry? Let’s cut the crap and get stuck into that answer.

Yacht varnish commonly takes between 4-6 hours to dry. This can be longer though depending on the brand of varnish used, with some taking up to 24 hours.

Drying Times By Brand

So although I have given you the general outline of how long yacht varnish takes to dry what you really want to know is how long yours will take.

In order to help you out, I have broken down the drying times by brand.

Ronseal Yacht Varnish

Probably the most popular yacht varnish on the market, so let’s start here.

• Dry Time: 4 Hours
• Coat Time: 8 Hours

This is the information straight from Ronseal. So touch dry in four hours and re-coatable in eight hours.

No Nonsense Yacht Varnish

The Screwfix special.

Not as much detailed information is provided here, we just have a dries in time of 16-24 hours.

Barrettine Yacht Varnish

Barrettine actually provides a lot more information for us here, which I love.

• Drying Times: Touch Dry: 6 hours.
• Hard Dry: 24 hours. (Low temperature/high humidity adversely affects drying time.)
• Overcoat Time: 12 hours or overnight.
• Full hardness up to 7 days.

Johnstone’s Trade Heavy Duty Yacht Varnish

A solvent-based long-lasting coating for exterior wood that offers water-resistant protection.

We just have a recoat time of 16-24 hours. No more details are given by the manufacturer, sorry!

Similar Posts

Can you use Zinsser Bulls Eye 123 on Aluminium?

Zinsser Bulls Eye 123 is a water-based primer from Zinsser. it is recommended for a whole heap of surfaces including plaster, brick, fibreglass, concrete, wallpaper and many more. But will it work on Aluminium? Well, as it happens, I have a tin of Zinsser 123 up at the workshop, along with an aluminium finger plate….

How Long Does Enamel Paint Take To Dry?

Enamel paint is known for being incredibly hard-wearing and has many uses. But it is not one of those paints most people are familiar with. Because of that, lots of questions come up when using enamel paint. One such question is how long does enamel paint take to dry. Let’s have a look and find…

Can You Paint Tiles With Chalk Paint?

Wanting to paint your tiles? Maybe you’re thinking of using chalk paint, but is this even possible? Can you paint tiles with chalk paint? So many questions, well I have answered them for you. I got some tile, grabbed a tin of chalk paint and did some testing. Read on to see my results. Priming…

Can You Paint Straight Onto Filler?

Filling any lumps and bumps can be a great way to improve the overall look and feel of your walls when decorating. But when it comes time to paint over the filler how do you get the perfect finish? Do you need to primer it or can you paint straight onto filler? Painting Filler You…

Can you use masonry paint on wood?

We have answered this question once and for all, and to make it as thorough as possible we grabbed five different types of wood along with four different possible wood paints. We painted our wood samples with masonry paint, exterior gloss, fence paint and finally allcoat. Let’s find out how the masonry paint got on…

Do you need primer with Zinsser AllCoat?

Here at The Bloke Cave, we are in love with Zinsser AllCoat, this is a really high-quality paint with tons of different applications. But when using AllCoat do you need to use a primer? Well, let’s find out. Do you need primer with Zinsser AllCoat? No. Zinsser AllCoat is a self-priming paint so you don’t…

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

How to Use Yacht Varnish? (A Step-by-Step Guide)

Are you looking for a way to give your boat a polished, professional finish? Yacht varnish provides a layer of protection and a beautiful shine that wont fade over time.

In this step-by-step guide, well explain what yacht varnish is, the benefits of using it, and how you can apply it to your boat.

Well also discuss preparation, application, drying, and sanding between coats, so you can be sure your boat is looking its best.

So, if youre ready to learn how to use yacht varnish, lets get started!.

Table of Contents

Short Answer

Yacht varnish is a protective coating used to seal and protect wood surfaces on boats.

To apply yacht varnish, start by sanding the wood surface with a fine-grit sandpaper.

Then, apply a thin coat of the varnish with a brush, working in long, even strokes.

Allow the varnish to dry for 24 hours before applying a second coat.

Finally, sand the surface with very fine sandpaper before buffing it with a soft cloth.

What is Yacht Varnish?

Yacht varnish is a specialized wood finish designed to protect outdoor wood surfaces from moisture and UV damage.

It typically consists of a blend of resins, oils, and solvents that provide a tough, yet flexible coating, which is ideal for protecting boat decks, outdoor furniture, and other wood surfaces that are exposed to the elements.

Yacht varnish also provides a glossy, attractive finish that enhances the beauty of the wood.

Unlike paint, yacht varnish does not completely cover the wood, allowing the natural grain of the wood to show through.

It is also relatively easy to apply and maintain, making it a popular choice for marine and outdoor wood surfaces.

Benefits of Yacht Varnish

When it comes to protecting outdoor wood surfaces, yacht varnish is an excellent choice.

Not only does it protect the wood from moisture and UV damage, but it also adds a beautiful shine and luster to the wood.

Yacht varnish is a long-lasting coating that can provide years of protection under the right conditions.

It is also easy to apply and can be used on a variety of wood surfaces, including boats, decks, and other outdoor wood surfaces.

When applied correctly, yacht varnish offers many benefits.

It forms a protective barrier against moisture and UV damage, preventing fading, cracking, warping, and other damage that can occur with prolonged exposure to the elements.

The coating also helps keep the wood from rotting, which can be an issue if the wood isn’t properly sealed.

Finally, the varnish adds a beautiful shine and luster to the wood, making it look like new.

Yacht varnish is also easy to apply and can be used on a variety of wood surfaces.

It is a great choice for any outdoor wood surface, including boats, decks, furniture, and more.

It is also relatively inexpensive and can be found at most home improvement stores.

With the right application, yacht varnish can provide years of protection and a beautiful finish to any outdoor wood surface.

Preparing the Wood Surface

Before applying yacht varnish, it is important to properly prepare the wood surface.

The surface should be thoroughly cleaned and dried, and any old varnish should be removed.

Sanding the wood will also help to ensure a smooth, even finish.

It is important to use the correct type of sandpaper for the project.

For instance, a medium-grit sandpaper is suitable for most wood surfaces, while a finer grit may be necessary for surfaces that require a more delicate finish.

Once the surface is prepared, it should be wiped down with a damp cloth to remove any dust or debris.

This will help ensure a successful application of yacht varnish.

Applying the Varnish

When it comes to applying yacht varnish, its important to understand the steps involved in the process.

First, the wood surface should be clean, dry, and sanded.

This ensures that the varnish will adhere properly and will provide maximum protection.

Next, apply a thin coat of varnish with a natural-bristle brush.

This helps to ensure even coverage and minimal brush strokes.

Allow the varnish to dry before applying a second coat.

Its important to allow the varnish to dry completely before applying any additional coats.

Sand lightly between coats to help ensure an even surface.

Additional coats should be applied as needed, but always be sure to allow the varnish to dry completely before exposing the surface to the elements.

With proper application, yacht varnish will protect your outdoor wood surfaces for years to come.

Allowing the Varnish to Dry

When it comes to yacht varnish, it is important to allow the varnish to dry completely before exposing the surface to the elements.

This will ensure that the varnish is properly bonded to the wood and will provide optimal protection from moisture and UV damage.

It is best to allow the varnish to dry for at least 24 hours before applying a second coat.

The drying time will also depend on the temperature and humidity of your environment, so it is important to allow for extra time if these conditions are not ideal.

Once the varnish is dry, it is recommended to lightly sand the surface before applying a second coat.

This will help to ensure that the varnish bonds properly and that the finish is even and smooth.

If additional coats are needed, the process should be repeated.

It is important to allow the varnish to dry completely between each coat, as this will ensure that the varnish fully bonds with the wood.

For best results, allow the varnish to dry for at least 48 hours before exposing the surface to the elements.

By allowing the yacht varnish to dry completely, you can be sure that the wood is properly protected and that the finish will last for years to come.

Sanding between Coats

Sanding between coats is an important step when applying yacht varnish.

After each coat of varnish is applied and has dried, the surface should be lightly sanded to remove any imperfections.

Sanding helps create a smooth, even finish and provides more effective protection against moisture and UV damage.

It also helps ensure that the next coat of varnish adheres properly to the surface.

When sanding between coats, use a fine-grit sandpaper (preferably around 320-400 grit) and sand in the direction of the wood grain.

This helps prevent scratches and other damage to the wood.

Be sure to only sand lightly, as sanding too aggressively can damage the wood and reduce the effectiveness of the varnish.

After sanding, use a clean cloth or brush to remove any dust or debris from the surface.

This will help ensure that the varnish adheres properly and provides the best possible protection.

Once the surface is clean, apply the next coat of varnish as normal.

With proper sanding between coats, yacht varnish will provide effective protection and lasting results.

Applying Additional Coats

Once you have applied the first coat of yacht varnish, it is important to apply additional coats for the best protection.

Depending on the specific product you are using, you may need to apply anywhere from two to seven coats.

It is important to allow the first coat to dry completely before applying any additional coats.

When applying additional coats, it is recommended to lightly sand the surface between each application.

This will help ensure a smooth, even finish and allow the varnish to adhere better.

After sanding, be sure to remove any dust or debris before applying the next coat.

When applying multiple coats of yacht varnish, it is important to use the same type of brush and same technique each time.

This will help ensure a consistent finish.

For example, if you used a natural-bristle brush when applying the first coat, it is recommended to use the same type of brush for subsequent coats.

Additionally, use long, even strokes when applying the varnish.

It is important to note that you should avoid applying too many coats of yacht varnish.

Too many coats can cause the varnish to become too thick and may make the surface appear uneven.

Generally, three to four coats should be more than enough.

Once you have finished applying the desired number of coats, allow the varnish to dry completely before exposing the surface to the elements.

With proper application and care, yacht varnish will help protect your outdoor wood surfaces for years to come.

Final Thoughts

Yacht varnish is a great way to protect your outdoor wood surfaces from moisture and UV damage.

Its important to apply yacht varnish correctly in order to get the best results.

Start by preparing the wood surface, then apply a thin coat with a natural-bristle brush.

Allow the varnish to dry before sanding and applying additional coats as needed.

With proper application, you can enjoy your outdoor wood surfaces for years to come.

Now that you know how to use yacht varnish, why not give it a try on your next project?.

James Frami

At the age of 15, he and four other friends from his neighborhood constructed their first boat. He has been sailing for almost 30 years and has a wealth of knowledge that he wants to share with others.

Recent Posts

When Was Banana Boat Song Released? (HISTORICAL INSIGHTS)

The "Banana Boat Song" was released in 1956 by Harry Belafonte. This calypso-style song, also known as "Day-O," became a huge hit and remains popular to this day for its catchy tune and upbeat...

How to Make Banana Boat Smoothie King? (DELICIOUS RECIPE REVEALED)

To make a Banana Boat Smoothie King smoothie at home, start by gathering the ingredients: a ripe banana, peanut butter, chocolate protein powder, almond milk, and ice. Blend the banana, a scoop of...

What’s the Best Varnish for Your Yacht?

Looking for the  best yacht insurance ? Buy your  sailing yacht insurance  online at Admiral Marine, or contact our expert team for advice.

Varnishing your yacht is an essential part of its care and maintenance. The benefits are twofold: yacht varnish protects your boat from the elements, while also giving it a beautiful shiny finish. But with so many different yacht and marine varnishes to choose from, it can be difficult to know which one is best for your boat.

In this article, we’ll run through some of the most popular types of yacht varnish on the market to help you choose the right option.

What is Yacht Varnish?

Yacht varnish is an extremely durable solvent-based coating that is designed to protect the wood that yachts are made of and stop it decaying over time. Most varnishes are made up of a penetrating oil, resin and solvent. Although most yacht varnish is applied with a brush, it is possible to buy yacht varnish spray.

Different Types of Yacht Varnish Finish

There are many different types of finish to choose from, so you’ll need to know a little about them to decide which is the best yacht varnish for you.

Designed by Freepik https://www.freepik.com/

Yacht Varnish Brands

There are various brands that produce yacht varnish. Here are a couple of the most popular:

Screwfix Yacht Varnish

Screwfix is a retailer in the UK that sells a variety of products, including hardware and building supplies. They may carry different brands and types of yacht varnish. Yacht varnish provides resistance to water, UV rays, and other environmental elements. Yacht varnishes often contain additives to enhance their durability and performance in marine conditions.

Ronseal Yacht Varnish

A durable, long-lasting marine varnish for wood that flexes with the movement of the wood and resists peeling and cracking. This varnish is slightly more pricey than the Screwfix varnish, but gets great reviews. You can buy the Ronseal brand of yacht varnish in B&Q and other retailers.

How to Varnish Your Yacht

Varnishing a yacht is fairly straightforward, if a little time-consuming. First you’ll need to carefully sand down the entire surface that you want to varnish to get it looking smooth. Then use a soft brush to wipe off any excess dust and debris, since you don’t want it getting trapped in the varnish.

Finally, use a paintbrush to coat the yacht with varnish. Leave it to dry for the recommended amount of time on the tin, then apply additional coats as required. Always check the instructions of your varnish type, and if unsure consult with an expert before starting.

Yacht varnish is solvent-based and contains toxic chemicals, which means it should not be used for varnishing animal enclosures (for example, rabbit hutches or reptile enclosures).

• What is yacht varnish used for? Yacht varnish is used for sealing and protecting wood on boats and yachts. It is also commonly used for outdoor items such as wooden doors, window frames or pergolas.
• What type of varnish is yacht varnish? Yacht varnish is a solvent-based outdoor varnish that is extremely durable. It is usually made up of tung oil and polyurethane resin. 
• What is the best varnish to use on a boat? The type of varnish that is best for your boat will depend on the type of wood your boat is made from and the finish you are looking for. Tung oil varnish is a safe bet for most boats, or you may prefer to use a one-part polyurethane varnish for added durability.
• What is the difference between yacht varnish and outdoor varnish? In general, yacht varnish dries quicker and is designed for marine conditions, so it’s likely to be more durable than outdoor varnish. However, yacht varnish is unlikely to have an anti-slip formulation, making it unsuitable for decking around the home.

Admiral Marine is a trading name of Admiral Marine Limited which is authorised and regulated by the Financial Conduct Authority (FRN 306002) for general insurance business. Registered in England and Wales Company No. 02666794 at 1st Floor, One The Square, Temple Quay, Bristol, BS1 6DG

If you wish to register a complaint, please contact the Compliance and Training Manager on  [email protected] .  If you are unsatisfied with how your complaint has been dealt with, you may be able to refer your complaint to the Financial Ombudsman Service (FOS).  The FOS website is  www.financial-ombudsman.org.uk

+44 (0)1722 416106 | [email protected] | Blakey Road, Salisbury, SP1 2LP, United Kingdom

Part of the Hayes Parsons Group

Which Yacht Varnish Is Best For My Boat?

Yacht varnish is a specialized type of varnish that is often used on boats. It has several advantages over conventional varnish, which is why it is becoming more and more popular among boat owners. In this guide, we will discuss the benefits of yacht varnish. We will also answer some common questions about yacht varnish. So if you are interested in learning more about this topic, keep reading!

Yacht varnish is a type of varnish specifically designed for boats. It is typically made from a tougher resin that can withstand the harsh conditions that boats are exposed to, such as salt water and sunlight. Yacht varnish also often contains UV inhibitors to help protect the wood from fading and other damage caused by exposure to sunlight. Conventional varnishes are not as durable as yacht varnish and will not stand up to the same conditions. This makes them less suitable for use on boats. However, they can still be used for other applications, such as furniture or around the garden.

Which types of varnish to use on my boat?

Marine varnish can be divided into three different types, each with its own perfect uses. Yacht owners choose to use one or all of these types for better performance.

Tung Oil-based varnish 

Is the most popular type among yacht owners who take boat maintenance seriously. International Schooner or Goldspar Boat Varnish are both oil-based varnishes that coats the wood evenly leaving a smooth finish while requiring minimal preparation work before it can be applied. This only requires a couple of coats. Is advisable to lightly sand the surface between coats to achieve the highest quality glossy finish. The smooth, high gloss finish will protect teak parts from water stains and help to maintain their appearance over time! Its UV protection helps prevent mould growth too which is especially important in wetter climates. Oil-based varnish is easy to apply and can be repaired by sanding and re-oiling the wood, meaning it will last longer than other conventional varnishes. It's also easier to apply compared with water-based yacht varnish which requires no sanding or priming before application.

Water-based boat varnish

Often used on marine boats where there is not much exposure to agitation or rubbing, making oil-based varnish too heavy for use. This yacht varnish type tends to leave a thin, powdery residue that needs sanding down after drying but offers better penetration into the wood than its oil counterpart. Polyurethane boat varnish - is much more hard-wearing than oil or water-based yacht varnishes. Stronger than oil-based or water-based yacht varnish, polyurethane yacht varnish tends to dry quickly and offers an ultra-hard surface that is resistant to impact, scratching and denting. This yacht varnish type has a high gloss tough finish so it's best suited for areas of the boat that are exposed to more wear and tear. This type of varnish can also be divided into two categories as one part polyurethane boat varnish and two-part polyurethane varnish.

One Part Polyurethane Varnish

The yacht varnish that is most commonly used for yacht paint jobs. The yacht varnish offers a quick drying time and can be easily re-coated within hours between each coat. It should be noted that due to its rigidity it is not recommended to be used for painting highly flexible wooden areas as it might crack in time leaving the wood exposed to elements. Two-Part Polyurethane Varnish - is the varnish with longer working times, making it easier to apply on larger boats. It's advisable to use only one part polyurethane yacht varnish for smaller projects as two-part yacht varnishes tend to leave an unprofessional finish when applied by hand. This type of varnish is extremely tough and consists of two products mixed together. It offers very good protection from moisture and UV damage but the same as the above this is not suitable for some areas on your yacht (such as spars) and it will crack as the wood moves and will leave the wood exposed to the elements.

Is yacht varnish waterproof?

Yes, yacht varnish is typically waterproof. This makes it a good choice for protecting boats from the elements. It can also help to keep the wood of the boat looking its best for longer.

Does yacht vanishes need a primer?

No, yacht varnish does not typically need primer. However, it is a good idea to test it on a small area of the surface you are going to varnish to make sure it adheres properly. If you do decide to use primer, make sure it is designed for use with yacht varnish.

Does yacht varnish seal wood?

Yes, yacht varnish seals the wood. It forms a protective barrier that helps to keep the wood from damage and keeps it looking its best for longer.

How long does yacht varnish last?

The lifespan of yacht varnish varies depending on the brand and the conditions it is exposed to. However, it typically lasts for several years, anywhere from two to three years before you need to apply a new coat or two. Some varnishes obviously last longer than others depending on the area where they will be applied.

Which is better? Woodstain or yacht varnish?

There is no simple answer to this question as it depends on the specific application and the needs of the user. However, in general, yacht varnish is a better option for protecting wood from the elements and keeping it looking its best. It is also typically more durable than wood stain, which makes it a better choice for boats.

Why is it important to sand between coats?

It is important to sand between coats of yacht varnish because it helps to create a smooth, even surface. This makes the final coat of varnish look its best and helps to protect the wood from damage.

How many coats should I apply?

The number of coats you should apply depends on the specific product you are using and the area you are varnishing. In general, two to three coats are sufficient. However, it is always a good idea to follow the manufacturer's instructions for the best results.

What type of finish can you get?

There are three types of finish on boat varnish: gloss, semigloss, and satin. Each one has its own benefits and drawbacks, so it is important to choose the one that best suits your needs. Gloss finish is the most durable, but it is also the most reflective. This can make it difficult to see in bright sunlight. The semigloss finish is less reflective than gloss, but it is still quite durable. It is a good choice for areas that receive moderate amounts of sunlight. The satin finish is the least reflective and also the least durable. However, it can provide a more natural look to the wood. It is a good choice for areas that do not receive a lot of sunlight.

Can you paint yacht varnish over wood stain?

Yes, you can put yacht varnish over the wood stain. However, it is important to make sure that the stain is fully dry before applying the varnish. Otherwise, you may end up with a sticky mess.

How long does it take for yacht varnish to dry?

The drying time for yacht varnish varies depending on the brand and the conditions it is used in. In general, you can expect it to take anywhere from six to eight hours to fully dry. However, it is always a good idea to read the manufacturer's instructions for the best results.

Can you thin yacht varnish?

Yes, you can thin yacht varnish if it is too thick. However, you should only use a thinner that is specifically designed for use with yacht varnish. Otherwise, you may end up with a poor-quality finish.

What is the best way to remove yacht varnish?

The best way to remove yacht varnish depends on the type of finish you have. If you have a glossy finish, you can use a polishing compound. For a semigloss or satin finish, you can use sandpaper. In general, it is best to remove yacht varnish with a power sander. However, you can also remove it by hand if you are careful.

Can I apply a new coat over the existing varnish?

Yes, you can apply a new coat of varnish over the existing varnish. However, it is important to make sure that the old coat is in good condition. Otherwise, you may not get the desired results.

Does yacht varnish go yellow?

Yacht varnish is designed to keep your boat looking good as new even throughout the season's hottest and coldest temperatures. The UV inhibitors prevent yellowing, which can otherwise occur due to exposure to external factors like sunlight or rainwater on a dock; they also remain slightly soft so that it will not crack when expanding or contracting with changes throughout each year. Liquids such as engine oils may cause blistering if left unprotected by an anti-blister agent like silicone lubricant (which contains graphite).

Is yacht varnish oil or water-based?

Yacht varnish is typically oil-based. This makes it more durable and resistant to fading. However, water-based varnishes are also available. These are less durable but easier to apply.

So which yacht varnish is right for you?

Choosing the right yacht varnish depends on how much time you want to put into maintaining your boat as well as its location. We stock a wide range of varnish suitable for any type of wood on your vessel.

More articles

Independently owned company.

Copyright © 2022. Fox's Chandleries Limited. All Rights Reserved. Registered in England and Wales, Company Number 03914760, our VAT registration is 939 9732 58.

Quick links

Contact information.

Fox's Chandlery Fox's Marina The Strand, Ipswich Suffolk, United Kingdom IP2 8SA  01473 688 431

Supported payment methods

Subscribe and receive exclusive information and offers!

123 John Doe Street Your Town, YT 12345

Store Hours Sun: Closed Mon-Fri: 9:00 - 17:00 Sat: 10:00 - 13:00

What to expect at pickup

Closing at 5pm

Closing at 1pm

• Search forums
• Practical Boat Owner's Reader to Reader

International Original Varnish

• Thread starter davidpbo
• Start date 23 Mar 2015
• 23 Mar 2015

Well-known member

Re-varnished the few bits of wood outside with International Original yacht varnish in July or August last year before we took it up to Winderemere last year were it stayed until October. I was very unhappy with the way it lasted particularly on a ply locker cupboard top. I don't recall how I prepared surfaces or how many coats I used, probably sanding then kight sanding between coats. The rear step which may have had more coats seems to have fared better. What are other people's experience of this product?  

davidpbo said: Re-varnished the few bits of wood outside with International Original yacht varnish in July or August last year before we took it up to Winderemere last year were it stayed until October. I was very unhappy with the way it lasted particularly on a ply locker cupboard top. I don't recall how I prepared surfaces or how many coats I used, probably sanding then kight sanding between coats. The rear step which may have had more coats seems to have fared better. What are other people's experience of this product? Click to expand...

I use Original a lot if I need the flexibility found with a traditional varnish and can't justify the expense of Schooner. I've found it's pretty good - easy to keep a wet edge and good flow characteristics so you can get a great finish. Three coats plus a thinned primer coat is the bare minimum rubbing down between each coat. But I would think 5 is my usual number of coats. Compass is also great for things like plywood, especially if you start with four coats of the two pack fast primer. Both primer and Compass give a fast build up and in warm weather can be done at two coats per day, only needing to sand every other coat. Compass is slightly harder to keep a wet edge and it more prone to go off in the tin. A little Thinners No1 helps it flow better. Using any sort of varnish is not easy, and I've found the human variable to be the most significant when it comes to a varnish job being successful or not.  

OK so it seems that I am not using completely the wrong product. I am sure it was what I used before and that lasted a couple of years, although it might have been Goldspar.  

davidpbo said: OK so it seems that I am not using completely the wrong product. I am sure it was what I used before and that lasted a couple of years, although it might have been Goldspar. Click to expand...

Members online

• rogerthebodger
• springertoo
• Medway Mudlark
• Irish Rover
• HappyHurley
• whiteshythe
• Fr J Hackett
• Buck Turgidson
• angelaclarksons
• Harbourlight
• Simon & Sally
• simonfraser
• wingcommander

Share this page

• International Marine Coatings
• International Protective Coatings

Always check the weather

When painting outside, always check what weather conditions are anticipated during the preparation, application and drying phases of any project. Should fair weather prevail, whether or not to commence painting will then depend on the air and surface temperatures, humidity and dew point. You may find the following hints and tips helpful when planning your project – further, product-specific guidelines can be found on individual product labels and data sheets.

General Guidance Notes:

• Dew point is important when applying paint to a surface, as the evaporation of the solvent from the paint draws heat and/or energy from that surface, cooling it down. If conditions are right condensation may form on the surface of the paint resulting in various problems.
• Relative humidity is important as air can only hold so much water or solvent vapor at any one time. So, as the relative humidity increases, the level of solvent vapor the air can hold reduces, meaning paint will effectively dry more slowly.
• Air and substrate temperature will affect the drying properties of any paint. Failing to observe the recommended drying times can result in coating failure, including improper drying, wrinkling and loss of adhesion.
• Always avoid extreme air or temperature conditions; Interlux products are tested across a range of temperatures, to ascertain the drying times and application characteristics of each product. Drying time recommendations are provided on our products labels; further information relating to weather considerations can be found on our product data sheets, available on our web site.
• Low temperatures will increase drying times; always check the ‘through-dry’ of each interim coat, before sanding or overcoating.
• Sanding too early can cause the paint to wrinkle under the sand paper, in some cases even tearing or gouging into the paint film making refurbishment difficult. Sanding before the paint film is ‘through-dry’ can also clog the sand paper, meaning more sheets are needed to complete the task.
• Overcoating too early can cause wrinkling, blistering and loss of gloss in the finished paint job.
• High temperatures will reduce drying times, but can make application more difficult, as product flow and leveling can be compromised – particularly when applying finishes or varnishes. Where appropriate, thinning recommendations to help with higher temperature application are provided on labels and data sheet.
• Do not paint in direct sunlight, or when the substrate itself is excessively warm, as the residual heat of the substrate can adversely affect the application and drying properties of any paint product; this can result in poor flow and leveling, rapid drying, cracking and loss of gloss. Surface temperature can be measured using a surface thermometer.

“What is ‘Relative Humidity’?”

Relative Humidity, or ‘RH’, measures the amount of water in the air in vapor form, comparing it to the maximum amount of water that can be held at a given temperature. For example, if the RH is quoted as being 50% at 73°F, this would imply that the air contains 50% of the maximum level of water vapor it could hold at 73°F. 100% RH indicates that the air is at maximum saturation. When humid air comes into contact with cooler air, or a cooler surface, the water vapor will turn into water droplets. When this occurs on a surface it is referred to as the ‘Dew Point’. Never apply paint above a maximum relative humidity of around 85% as at that level you will reach the dew point regardless of surrounding temperatures. Relative Humidity can be measured using a hygrometer; a hygro thermometer will measure both temperature and humidity.

“What is ‘Dew Point’?”

We have all experienced ‘Dew Point’ at some stage. Condensation on windows is an obvious example. Dew Point is the temperature at which the air can no longer hold its water vapor and starts to form water droplets i.e. condensation. Condensation forms when air temperature lowers, reducing the amount of energy available to keep the water in vapor format. For example, a window forms condensation when the cool night air hits the outside surface of the glass, lowering the surface temperature and the humidity in the house is high enough to cause condensation on the inside of the glass surface. When painting, it is essential that you are able to paint a surface and avoid condensation forming during the application and drying stages. The optimum surface temperature for paint application is normally around 6°F above the Dew Point; however some products may be more or less tolerant. When working with Interlux products, if in doubt, it’s always worth checking the relevant technical data sheet Dew Point can be calculated using the relative humidity and the air temperature; however, Dew Point ‘lookup’ tables are widely available via the internet.

Key points to note when applying finishes and varnishes:

• Dry, well ventilated conditions are preferable when applying finishes or varnishes. While gentle air movement will assist the drying process, a dust-free environment is critical to achieving a good quality gloss finish; always avoid painting in windy conditions.
• The effects of dust contamination may be further reduced by sanding lightly between each coat, removing residual dust by wiping down with a suitable solvent and allowing to dry before applying the next coat. This will also help improve the initial aesthetics.
• Avoid applying two-part finishes or varnishes late in the afternoon or when relative humidity exceeds 80% as these products are particularly sensitive to moisture. Condensation during application or due to overnight ambient temperature changes can affect the chemical cure of these products resulting in loss of gloss.
• When painting or varnishing wood avoid applying if the ambient temperature is increasing (or predicted to increase) significantly. This is because rising temperatures cause wood to expand, which can lead to blisters forming in the paint or varnish film. A good tip is to apply when the temperature is falling, as the wood will better absorb the paint or varnish, giving better overall results.

Key points to note when applying epoxies (e.g. Watertite, InterProtect®, Epoxy Primekote)

• When curing in high humidity conditions, particularly at lower temperatures, epoxies can develop an ‘amine blush’ on the surface. This slightly sticky substance must be removed and can normally be washed off with soap and water. If the blush is not removed it can lead to the delamination of subsequent coats. Failure to remove the blush will also make sanding more difficult.
• High humidity conditions can reduce the amount of solvent evaporation during the drying/curing stages; with epoxies this can lead to a ‘soft cure’. As epoxy-based materials are generally applied at a higher film thickness, solvent can remain trapped in the film for many days leading to slow or poor final cure.
• Although epoxies generally cure well in most conditions, when the temperature falls to 45°F or below, curing can slow or even stop. Remember to check both day and overnight temperatures whether working outdoors or in a shed.
• Epoxy products usually respond well to a little heat; on cold days introducing a safe form of heating into the application area is well worth considering.

Paint your boat like a pro

Find the best products to keep your boat in great condition

Get all the support you need to paint with confidence

Benefit from our continuous innovation and scientific expertise

Select your country

Our products and guidelines are customised for each country. Please select yours below.

• Canada Canada
• United States United States

Asia Pacific

• Australia Australia
• New Zealand New Zealand
• Singapore Singapore

• België Belgium
• Hrvatska Croatia
• Danmark Denmark
• Suomi Finland
• France France
• Deutschland Germany
• Ελλάδα Greece
• Ireland Ireland
• Italia Italy
• Nederland Netherlands
• Norge Norway
• Portugal Portugal
• España Spain
• Sverige Sweden
• United Kingdom United Kingdom

Middle East & Africa

• South Africa South Africa
• Türkiye Turkey

Who's painting?

Choose one of the following to tailor the site to your needs.

• Facebook Page
• Twitter Page
• Instagram Page
• Youtube Page

What is it you're looking for?

Yacht varnish

Yacht Varnish protects outdoor wood all year long so it’s perfect for windows and doors. It’s a tough traditional varnish and resists cracking, peeling and blistering.

• Long lasting protection for outdoor wood
• Waterproof and protects from the sun
• Extremely tough – resists cracking, peeling and blistering
• Highlights wood’s natural colour
• Prevents wood from greying over time
• Protects against sun damage
• Won't crack, peel or blister

Allow us to use your location

To access tailored content on this page, enable location cookies. Review your cookie preferences and ensure statistical cookies are enabled for the best experience.

How much paint do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Need to know

This no-nonsense varnish is extremely tough and durable, giving you a long-lasting glossy finish.

Eight hours might seem like a long time to wait between coats, but it guarantees you lasting protection and the best finish.

3 coats give you a glossy finish

Varnishes up to 16m2 per litre

Brush it on

Smooth exterior wood like doors and windows

How to use Yacht Varnish

Before you start.

Make sure your wood is dry before you begin. Choose a day that’s reasonably warm (above 10°c) and dry.

This varnish isn’t suitable for decking though.

How to prepare wood for varnishing

• You will need to remove old stain or varnish by sanding it down. Use 120 grit sandpaper and sand away the old finish.
• Wipe down the surface with white spirit and a cloth to remove the leftover dust.

If your wood is brand new, you will need to sand it to remove loose wood and clean with white spirit.

Application

• Thoroughly stir your varnish to make sure it’s smooth and there’s no lumpy bits.
• Test it on a small patch of your door. It’s clear varnish but it may still darken the natural colour of your wood so make sure you’re happy with it.
• If you are, start painting with a brush. Go in the direction of the grain and for best results, apply two or three coats. Wait eight hours between each coat.
• Before you apply your last coat, lightly sand the surface and use white spirit to remove the excess dust. This will give you a nice smooth finish. Your last coat will be dry in four hours.

Once your varnish is dry, you’ll be able to clean your door as normal. Keep on top of the dirt and grime for a friendly welcome to your home.

You can clean your brushes with white spirit or brush cleaner.

It’s easy to repair your varnish if sections of it become damaged. Simply use some sandpaper to sand down and smooth out the damaged part and then add a couple of coats so it’s good as new again.

Technical Specification

Find the right product

Tell us about your DIY project and we’ll show you which products you need.

Find the right product for you

• Accessibility [a]
• To the top of this page [t]
• To the main content of this page [c]
• To the bottom of this page [b]
• Site search
• Accessibility
• Privacy Policy
• Terms & Conditions
• Video Guides
• Wood Protective Treatment
• Wood Preserver
• Woodworm Killer
• Universal Preserver
• Decking Oil All-In-One
• Anti - Slip Decking Oil
• Armourflex UV Protection Oil
• Timber / Decking End Cut Preserver
• Raw Linseed Oil
• Boiled Linseed Oil
• Armourflex Hardwax Oil
• Polishes, Shellacs & Knottings Images
• Paint Panther
• Genuine Turpentine
• Mineralised Methylated Spirits
• White Spirit
• Low Odour White Spirit
• Turps Substitue
• Cleaning & Maintenance Images
• Black Disinfectant
• Tile & Stone Cleaning/Sealing & Aftercare Images
• Outdoor Leisure & Cleaning Images
• Pest Control
• Armourflex Lacquer
• Barrettine Group
• Barrettine Environmental Health
• Barrettine Industrial
• Woodman Hill
• Product Articles & News
• New Products
• Testimonials
• Celebrating 140 Years of Business
• Exterior Wood Care
• Armourflex Ultimate UV Protection Oil

0117 9600 060

Home products, yacht varnish.

Product description:

High durability, Clear Gloss Yacht Varnish. 

A tough, top-quality varnish with a high gloss finish. Protects against cracking and flaking caused by UV light. Also provides complete and long-lasting protection under testing weather conditions. Suitable for exterior and interior applications. Ideal for use on boats, doors, window frames, garden furniture and many other items, especially in a marine or exposed environment.

• Drying time:  6 hours
• Coverage:  14m² per litre.

Sizes:  1 Litre, 2.5 Litre

Related products:

Armourflex Hard Wax Oil

Armourflex® Wood Floor Lacquer/Varnish

Quick Drying Floor Varnish

Traditional Floor Wax

• Display Prices Excl VAT | Incl VAT

• Search for:
• Login / Register

No products in the basket.

Return to shop

What You Need To Know About Buying Yacht Varnish

Yacht / Marine Varnish Plays An Important Role

Yacht Varnish is key to keeping your boat exterior in great condition. When it comes to owning a yacht, there are many exciting factors that will factor into your decision. From the layout and amenities to the style and aesthetic, there are numerous things that play into owning a yacht.

However, for many people, one of the most important factors is the look and feel of the boat. When you own a yacht, it’s essential to take care of it so that it remains in great condition for years to come.

A big part of caring for your yacht involves making sure you have all the necessary supplies on board.

A little bit of history on the origin of Yachts:

The word yacht itself was first utilized in Dutch back in the 16th century and said like “jacht” Dutch people were among the innovators of modern recreational sailing. They chased pirates and enemies on fast yachts while dominating the seas.

Nowadays, Yachts are not just for the rich but are used by many for recreational sailing. You can even rent a luxury yacht for a special occasion or date to enjoy with your friends and family. Yachts are available for sale online, a fully crewed yacht can be rented for a few thousand pounds!

Questions & Answers:

Is there an alternative to tin yacht varnish.

Yes, we have specifically formulated an Aerosol version, clear gloss. This is helpful for smaller areas that you need to coat. It can also be used for all types of external wood for protection. Find this product here: https://www.palatinepaints.co.uk/product/yacht-varnish-clear-gloss-for-exterior-wood-aerosol-spray

How long does yacht varnish take to dry?

Varnish depends on the varnish humidity and temperature, as well as on whether you want it to dry before things get cold and humid late in the day. You would like to be dust-free for a couple of hours so that the varnish gets dry enough that it won’t pick up dust.

Our Yacht varnish is surface dry in 2 hours with a hard dry in 8.

Is it possible to Varnish over existing varnish without sanding?

It is possible to varnish over the existing finish, but it is not recommended. You may experience adhesion issues because you don’t know what the base clear coat is or whether it is compatible with varnishes, even if you were able to determine it.

You must clean and wipe down the surface with mineral spirits and lacquer thinner on dampened cotton cloths before varnishing. Finally, you must sand the surface lightly.

What is the Purpose of Yacht Varnish?

Varnish is a protective coating that is applied to the surface of your boat to help protect it from the elements and against staining. While you may not be able to prevent your boat from being scratched or scraped as it is in regular use, using varnish can prevent your boat from getting stained.

This is especially true of the areas that are used the most like the table, the floors, and the walls. In addition to protecting your boat, varnish also helps your boat look even better. With a smooth and shiny surface, your boat will look more attractive and stylish than ever before.

Our Yacht varnish doesn’t just have to be limited to your Yacht though, It has many uses such as being applied on pieces of furniture, entrance doors and musical instruments.

An overview of the benefits of using our Marine Yacht Varnish

• It provides excellent adhesion to wood and impregnates the material’s surface instantly, adhering to the wood structure for a long time and having a long-lasting effect.
• UV radiation is absorbed and converted into heat by special components present in yacht varnish, making the sun’s almost negligible effect on the material protective film intact.
• The varnish protecting boats from UV radiation contains special compounds that absorb and convert ultraviolet light into heat, protecting the protective coating from degradation. This minimizes the sun’s adverse effects.
• The material is resistant to abrasion and wear thanks to the coating. The film protects the coating from scratches and chips in this case.
• No chemical reactions occur when wiping the surface using household chemicals, if necessary. Acids, alkalis, and salts do not cause a reaction.

Why does your yacht need varnish?

Just like any other boat, your yacht needs to be protected with varnish. This protective coating is applied to the surfaces of your boat to prevent it from being stained and water damaged, it keeps out moisture and as mentioned in the benefits above, it provides you with a high level of UV protection . In addition to keeping your boat in great condition, varnish also makes your boat look more attractive.

With our high gloss varnish, it creates a quality finish that is smooth and shiny.

If you own a Yacht and want to keep the wood in great condition, you’ll be needing to apply several coats of Yacht varnish but the results would be fantastic, one that you would love to show off. Palatine Paints have spend years testing and applying all of our paints to ensure we reach the highest level of quality possible, our Yacht varnish has glowing reviews which allows our product to speak for itself.

Yacht Varnish Interior & Exterior

From £ 12.95 Incl. VAT From £ 10.79 Excl. VAT

Palatine Yacht Varnish is a tough, traditional varnish for new, previously painted, stained or varnished surfaces.  Its quality and high gloss finish means it’s perfect for yachts, boats and other exterior wood projects.

Also available in an aerosol .

Yacht Varnish Spray – Clear Gloss Aerosol

From £ 8.14 Incl. VAT From £ 6.78 Excl. VAT

A tough varnish in a handy spray can for quick and easy use. Not just for yachts and boats, but all sorts of exterior uses.

• Protects new, previously painted, stained and varnished surfaces
• Extremely durable – resists cracking and blistering
• High gloss finish spray
• Also available in a tin format

One thought on “ What You Need To Know About Buying Yacht Varnish ”

is this varnish white inside the tin. jd

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Paint Colour Matching Service

To provide the best experiences, we and our partners use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us and our partners to process personal data such as browsing behavior or unique IDs on this site and show (non-) personalized ads. Not consenting or withdrawing consent, may adversely affect certain features and functions.

Click below to consent to the above or make granular choices. Your choices will be applied to this site only. You can change your settings at any time, including withdrawing your consent, by using the toggles on the Cookie Policy, or by clicking on the manage consent button at the bottom of the screen.

Username or email address  * Required

Password  * Required

Remember me Log in

Lost your password?

Email address  * Required

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy .

Varnish Not Drying? (How To Fix That Sticky Varnish Problem)

Are you struggling to get that varnish coat to dry?

You’ve tried everything, turned up the heat, and opened a few windows. Heck, you’ve even tried spot-drying with a hair dryer. And yet that tacky varnish coat refuses to solidify.

Well, before you throw in the towel, (and sand off the varnish completely), give this article a quick read.

That’s because if you check out the post below, you will learn why a tacky varnish has more to do with ‘curing’ than drying. We also reveal why a hair dryer is not the best way to dry sticky varnish.

And discover why a little mineral spirit could go a long way towards fixing that tacky finish…

This post may contain affiliate links to products that we receive a commission for (at no additional cost to you). Learn more here.

Why Does Varnish Tend To Dry Faster Than Other Oil Finishes?

There are many different types of varnish, but the one generally used for wood finishing is oil-based varnish.

It’s made from a blend of drying oils, fast-drying solvents, and resins. As a result, varnish acts very much like a quick drying oil finish.

This means that not only will varnish dry, (evaporate from a liquid to a solid film), it will also go on to cure, (change from a solid film into a hard resin).

Related Post: Can You Really Varnish Over Linseed Oil? (Best Practice Revealed)

What Is The Difference Between Drying And Curing?

When it comes to varnish, the process of ‘drying’ refers to evaporation. Heat turns solvents into fumes, leaving behind a solid film.

It only takes varnish a few hours to dry. And a fast-drying varnish product can solidify in as little as 30 minutes.

However, the process of ‘curing’ is a chemical reaction, one in which varnish goes through polymerization. And this turns varnish into a final hard durable coat.

And the curing process takes much, much longer than just drying…

Related Post: Can You Use Food Safe Wood Varnish On A Butcher Block?

What Is A Typical Varnish Cure Time?

A water-based varnish can take around 2-3 weeks to cure all the way through. While an oil-based varnish takes a little longer, requiring 30 days or so to complete curing.

Why Is This Varnish Tacky Across The Surface?

A tacky varnish is basically one that still feels soft to the touch. It may be a dry film, but it’s anything but solid.

The real problem with a tacky varnish isn’t that varnish isn’t drying. The issue is that your varnish coat is struggling to cure.

Now, the drying and curing times listed on the side of that varnish product, depend on whether that varnish is drying in ideal conditions.

In the right environment, varnish will dry without much fuss. But if the temperature is too low, (or the humidity is too high), varnish won’t cure.

What Are The Ideal Drying Conditions For Varnish?

For an oil-based varnish, you need the room temperature to be between 40 °F to 90 °F. In addition to that, the room needs to be relatively free of humidity.

Humidity levels above 85% will make it next to impossible for varnish to cure (or even dry) at all. So, aim for a humidity range of between 40% to 50% or so.

What If The Temperature And Humidity Aren’t The Problem?

If varnish has been left to dry in fairly optimal conditions, then the next thing you need to check for is excess varnish.

You see, it is very easy to apply too much varnish per coat. Especially if you’ve put it on using a brush.

Varnish is already very thick to begin with. And, more often than not, varnish needs a thinning agent to dilute it a bit before application.

So, if too much varnish has been layered on, you need to try and remove the tacky excess. In short, you need to thin out the coat by doing the following:

1). Dampen a lint-free rag in mineral spirits or turpentine.

2). Run that rag over the tacky varnish surface.

You’re aiming to soften up the varnish with mineral spirits. At least enough so that you can scrape it off afterward. Don’t attempt to remove the varnish using that damp rag.

3). Once the varnish has softened enough, use a fresh clean lint-free rag to wipe off the excess.

This will leave behind a much thinner varnish film. And that thinned out varnish coat will dry and cure much faster.

This Varnish Is Still Sticky After A Week! Will Sticky Varnish Dry Eventually? Unless you know what’s preventing it from curing, a tacky sticky varnish isn’t going to dry anytime soon. If you leave tacky varnish as is, it could be months (or even longer) before it finally firms up.

Can You Try Drying Varnish In The Sun?

You could… varnish will certainly dry under sun rays. However, the way it will dry can create another problem altogether; bubbling .

And here’s why; blasting direct sunlight at varnish only serves to ‘cook’ varnish from the outside in.

Basically, the outermost part of that varnish coat will ‘flash’ dry and cure way too fast. But, all of the varnish just underneath it will continue to dry and cure at a slower pace.

This can create bubbling problems across the varnish coat.

That’s because the still curing varnish, (underneath the ‘cooked’ varnish), is still drying and releasing solvent fumes. This is referred to as ‘off-gassing’.

Those varnish off-gassing bubbles are essentially all trapped. And this is what creates bubbling across a varnished surface.

So, best practice is to let varnish dry at its own pace, in low-light conditions.

What About Drying Varnish With A Hair Dryer?

You shouldn’t use a hair dryer to dry varnish. At least not if you want a nice, even finish.

Blowing air around will kick up dust and grit. And those dust nibs and grit can end up landing on the varnish, only to get caught up in the finish as it dries.

Related Post: Are There Dust Nibs In Your Polyurethane Finish? (How To Fix It)

Why Is My Varnish Dry In Some Areas And Only Tacky In Certain Spots?

Sometimes, the problem may not be with getting the varnish coat itself to dry and cure. Sometimes, the problem lies beneath it.

When a varnish coat is only tacky in certain areas, (yet has cured through in other sections), then your problems go deeper. On these rare occasions, your problem is that natural wood surface wasn’t clean of a previous old wood finish.

This can tend to happen if you’re refinishing furniture. So, before you apply varnish, you need to make sure you’ve removed all of the previous finish first (particularly any wood wax finish).

Related Post: Can You Varnish Over Wax Finished Furniture?

If you don’t, (and you layer varnish over those ‘old finish’ spots), the varnish coat may never cure.

What Can You Do If The Wooden Surface Itself Is The Problem?

Only option in this extreme case is to strip the varnish coat off completely using mineral spirits.

You would then carefully clean the bare wooden surface underneath using mineral spirits again. Afterwards, you can then go on to reapply the varnish coat.

To Wrap Up, Here Are The 3 Main Takeaways…

1). Oil-based varnish should stop feeling tacky after 30 days. And a water-based varnish should solidify within 21 days. 2). If you leave varnish to dry in direct sunlight, that transparent film coat could end up looking bubbled. 3). Fix tacky varnish by thinning and smoothing it out using a mineral spirit dampened rag.

References:

Effect of wood moisture content on adhesion of varnish coatings – Academic Journals.org

Related Posts:

Log in or Sign up

You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser .

Yacht Varnish not Drying

Discussion in ' Painters' Talk ' started by riskyone , Aug 19, 2010 .

riskyone New Member

I bought some yacht varnish for my boat used it up and was pleased with the results. I bought another litre and prepared and varnished more bits of the boat – sadly, the varnish failed to dry and the next day (a good 20 hours after application) the surface remained soft and tacky. Thinking it must be my fault, I remixed the varnish and applied a second coat. Guess what, it also failed to dry fully. So I phoned Screwfix and they advised that I should contact the varnish manufacturer. They asked for the batch number and promised to test the sample they had of the same batch; they phoned the following day to say that their sample had dried perfectly and that it must be mositure trapped in the first coat stopping the second coat drying. Their professional advice was to leave it another two days (making a total of 5 days) and (hope?) it would dry. Has anybody had a similar problem? I’m left with a half varnished boat that is supposed to be going in the water this coming weekend; if I leave it another two days and it still hasn’t dried, I have no time to strip the Screwfix varnish off and varnish with something else. The manufacturers advice seems like nonsense to me; the first lot of varnish dried within the stated 16 hours appled under the same conditions as the second lot of varnish that hasn’t dried in 5 days! Any advice / suggestions much appreciated.  

Goodwill Member

Risky, Varnishes are sensitive to temperature changes, moisture (in the surface and in the close atmosphere), as well as various fumes and other dangers. Some possible causes of your problem: 1. When you prepared the surfaces in question did you introduce any water in the process? If so it would have needed sufficient time to completely dry out (one to two days). 2. Did you apply the varnish on a particularly humid day? 3. The ideal temperature range to apply varnish is around 60 to 65 F so the varnish should also have been stored at approximately the same temperature range (equalisation of air and varnish). Taking note of what I have outlined above, I would suggest that you carryout an indoor test of this varnish to ensure that it does indeed dry in the right conditions. Then decide if it is okay or whether you have to purchase some replacement varnish. I would suggest that you strip the offending varnish, using a spirit washable paint/varnish remover. Re-prepare and re-varnish in accordance with the advice which I have given.  

Share This Page

• Log in with Facebook
• No, create an account now.
• Yes, my password is:
• Forgot your password?

• Search titles only

Separate names with a comma.

• Search this thread only
• Display results as threads

Useful Searches

• Recent Posts
• Dismiss Notice

• International Marine Coatings
• International Protective Coatings

Above the waterline

Below the waterline

Wood varnishing

Supplements & tools

Care and maintenance.

Clean, restore, protect, and maintain your boat’s surfaces.

Fillers and Epoxy

For fairing, filling scratches/holes and boat-building repairs.

Fouling Control

Protection from fouling such as barnacles, weeds and slime. Includes antifouling products.

Seals and protects bare substrates above and below the waterline.

Products to ease boat paint application and/or clean equipment.

Topcoat Finishes

Hull, deck, interior and bilge coatings for protection and aesthetics

Base for topcoat finishes.

Stunning, durable boat and yacht varnish finishes and natural-looking tints.

Paint your boat like a pro

Find the best products to keep your boat in great condition

Get all the support you need to paint with confidence

Benefit from our continuous innovation and scientific expertise

Select your country

Our products and guidelines are customised for each country. Please select yours below.

• Canada Canada
• United States United States

Asia Pacific

• Australia Australia
• New Zealand New Zealand
• Singapore Singapore

• België Belgium
• Hrvatska Croatia
• Danmark Denmark
• Suomi Finland
• France France
• Deutschland Germany
• Ελλάδα Greece
• Ireland Ireland
• Italia Italy
• Nederland Netherlands
• Norge Norway
• Portugal Portugal
• España Spain
• Sverige Sweden
• United Kingdom United Kingdom

Middle East & Africa

• South Africa South Africa
• Türkiye Turkey

Who's painting?

Choose one of the following to tailor the site to your needs.